Panthera TIGRIS chip tuning

Chip tuning Cupra Ateca 2.0 TSi 4Drive 300 hp

  • Ateca (KBP, KH7, KHP)
  • Model years 2018–2025
  • 1984 cc
  • 221 kW / 300 hp
  • 400 Nm
  • Petrol

Key numbers (HSN/TSN): 7593/AOD, 7593/ATK
Found in the German registration certificate Part I (Fahrzeugschein), fields 2.1 and 2.2.

There is 1 matching TIGRIS chip box for the Cupra Ateca 2.0 TSi 4Drive, built 2018–2025. The TIGRIS PRO App raises power by up to 69 hp to 369 hp and torque by up to 83 Nm to 483 Nm – up to 23 percent more.

up to+69 hpmore power
up to+83 Nmmore torque
up to−15 %lower consumption
TIGRIS PRO App · Stage 3
€499.00 €599.00
incl. 19% VAT · Shipping calculated at checkout.
Ships within 24 hours on working days

Performance: stock vs. TIGRIS

Cupra Ateca (KBP, KH7, KHP) 2.0 TSi 4Drive, 1984 cc, 221 kW
StockTIGRIS PRO App
Stage 3
Power 300 hpup to 369 hp +69 hp (+23 %)
Power (kW) 221 kWup to 272 kW +51 kW
Torque 400 Nmup to 483 Nm +83 Nm (+21 %)
Fuel consumption –up to −15 %
Price –€499.00

Stock figures: manufacturer data. TIGRIS figures: maximum values measured on the in-house Panthera dynamometer. Actual gains depend on vehicle condition, fuel and ambient conditions.
incl. 19% VAT · Shipping calculated at checkout.

Matching TIGRIS chip box

TIGRIS PRO App

TIGRIS PRO App

Stage 3 · up to +69 hp / +83 Nm · up to −15 % fuel consumption
  • App control
  • 3 driving modes with 9 fine-tuning mappings each
  • ECO driving profile for even greater fuel savings
  • Waterproof housing - IP6K6K
  • Engine protection "Protect+" - All engine protection functions remain intact
€499.00 €599.00
incl. 19% VAT · Shipping calculated at checkout.
Ships within 24 hours on working days
  • Plug & play with original connectors
  • Installation in approx. 15–30 min
  • 24-month warranty
  • Reversible at any time
Box details

How the TIGRIS chip box works

Reserves left unused from the factory

Manufacturers tune their engines for the world market: for poor fuel, extreme heat or cold and for production tolerances. The TIGRIS chip box puts these reserves to targeted use in your Ateca 2.0 TSi 4Drive 300 hp.

No changes to the engine software

The box connects to the boost pressure sensor and the manifold absolute pressure (MAP) sensor. It sits between sensor and wiring harness using original connectors and processes the signals in real time. The original software stays unchanged and all protective functions of the engine control unit remain active.

Not to the limits of what is possible, but of what makes sense

We develop every power upgrade on our in-house dynamometer and test it in series of trials for everyday usability and engine compatibility. The result deliberately stays within the load limits of your engine. You get real, measured figures instead of estimates, and all protective functions are retained.

More about our dyno →

Your benefits

  • Tuned for your vehicleProgrammed for the Ateca 2.0 TSi 4Drive 300 hp, not a one-size-fits-all box.
  • Plug & playOriginal connectors, no cutting, no soldering.
  • Quick installationIn approx. 15–30 minutes, no workshop needed.
  • Individual installation guideSpecific to your engine, explained step by step.
  • Reversible at any timeBack to stock in a few minutes.
  • TransferableWhen you change cars, the box can be reprogrammed for your new vehicle.
  • More pulling power every dayStronger when overtaking and accelerating.
  • Also for automaticsSuitable for manual and automatic transmissions.
  • Tested qualityEvery unit is tested several times before shipping.
  • 24-month warrantyPlus personal support by phone and WhatsApp.

What’s in the box

  • TIGRIS chip box, programmed for your engine
  • Vehicle-specific wiring harness with original connectors
  • Mounting material (cable ties)
  • Individual installation guide

Frequently asked questions

How is the TIGRIS chip box installed in the Ateca 2.0 TSi 4Drive 300 hp?

Plug & play: the box connects between sensor and wiring harness using original connectors, with no cables cut. On the Ateca 2.0 TSi 4Drive 300 hp, it connects to the boost pressure sensor and the manifold absolute pressure (MAP) sensor. With the individual installation guide, installation usually takes 15–30 minutes and can be done without a workshop.

Can I remove the chip box again?

Yes, at any time. Unplug the box, reconnect the original connectors, and your Ateca 2.0 TSi 4Drive 300 hp is back to stock without a trace in a few minutes – before selling the car, for example. When you change cars, the box can be reprogrammed for your new vehicle.

What warranty do I get?

The TIGRIS chip box comes with a 24-month statutory warranty. Every unit is tested several times before shipping.

Which fuel do I need?

For the full power gain, we recommend at least Super Plus (98 RON) for the Ateca 2.0 TSi 4Drive 300 hp. With lower-octane fuel, the engine control unit automatically reduces power via knock control. With high-quality fuel, full power is available again.

Do the service intervals change?

No, service intervals stay the same as for the stock vehicle. With a sporty driving style, we recommend changing the oil a little earlier and using high-quality synthetic engine oil.

Does the chip box work with automatic transmissions?

Yes, the TIGRIS chip box is suitable for both manual and automatic vehicles.

Will the engine get louder?

At idle and in normal driving there is no difference. When you call up the extra power, the engine may sound slightly fuller.

Do brakes or tyres need to be upgraded?

Our power upgrades are tuned so that, as a rule, no further modifications are needed.

Is there a TÜV parts certificate?

No, there is no TÜV parts certificate (Teilegutachten) for the TIGRIS chip box. In Germany, power upgrades without type approval (ABE) or parts certificate must be registered. Please also inform your insurer.

Questions? We are here for you

Before you buy or during installation: our team will advise you personally by phone or WhatsApp.

Mon–Fri 9 am–5 pm (CET)

Also fits your Ateca 2.0 TSi 4Drive 300 hp

More engines and brands